Question

You are a network technician for a small corporate network. You want to take advantage of the self-healing features provided by the small enterprise wireless solution you've implemented. You're already logged in as WxAdmin on the Wireless Controller console from ITAdmin.
In this lab, your task is to:
Configure self-healing on the wireless network. Automatically adjust AP radio power to optimize coverage when interference is present. Set 2.4 GHz and 5 GHz radio channels to use the Background Scanning method to adjust for interference.
Configure the background scanning needed for rogue device detection, AP locationing, and self-healing. Background scans should be performed on all radios every 30 seconds.
Configure load balancing for all radios by adjusting the threshold to 40 dB.
Configure band balancing to allow no more than 30% of clients to use the 2.4 GHz radios.
Reduce the power levels to -3 dB for three access points in Building A to reduce RF emanations. Use the wireless survey results in the exhibit to identify the access points.

Answer 1

To configure self-healing on the wireless network, you can use the following steps:

In the Wireless Controller console, go to the Configuration menu and select the Self-Healing option.

Enable the self-healing feature by checking the "Enable Self-Healing" box.

Set the radio power to automatically adjust when interference is present by checking the "Adjust Radio Power to Optimize Coverage" box.

Set the 2.4 GHz and 5 GHz radio channels to use the Background Scanning method to adjust for interference by selecting the "Background Scanning" option from the drop-down menu.

To configure background scanning for rogue device detection, AP locationing, and self-healing, you can use the following steps:

In the Wireless Controller console, go to the Configuration menu and select the Background Scanning option.

Enable background scanning by checking the "Enable Background Scanning" box.

Set the frequency of the scans to every 30 seconds by selecting "30 seconds" from the drop-down menu.

Enable rogue device detection, AP locationing, and self-healing by checking the corresponding boxes.

To configure load balancing for all radios, you can use the following steps:

In the Wireless Controller console, go to the Configuration menu and select the Load Balancing option.

Enable load balancing by checking the "Enable Load Balancing" box.

Set the threshold to 40 dB by entering the value in the "Threshold (dB)" field.

To configure band balancing to allow no more than 30% of clients to use the 2.4 GHz radios, you can use the following steps:

In the Wireless Controller console, go to the Configuration menu and select the Band Balancing option.

Enable band balancing by checking the "Enable Band Balancing" box.

Set the maximum percentage of clients allowed to use the 2.4 GHz radios to 30% by entering the value in the "Max Percentage of Clients Allowed on 2.4 GHz Radio" field.

To reduce the power levels to -3 dB for three access points in Building A, you can use the following steps:

In the Wireless Controller console, go to the Configuration menu and select the Access Points option.

Identify the access points in Building A using the wireless survey results in the exhibit.

For each of the identified access points, select the access point from the list and click the Edit button.

In the Access Point Configuration page, navigate to the Radio Configuration section and set the power level to -3 dB for each radio.

Click the Save button to apply the changes.

Read more about this at https://brainly.com/question/13940870

#SPJ4