Question

rearrange the following procedures in there proper order. use numbers (1-8) to indicate their order of precedence.
.___________crimp
.___________strip cable end
.___________test
.___________untwist wire ends
.___________trim wires to size
.___________check
.___________arrange wires
.___________attach connector​

Answer 1

Answer:

6 - crimp

1 - strip cable end

8 - test

2 - untwist wire ends

4 - trim wires to size

7 - check

3 - arrange wires

5 - attach connector​

Explanation:

Step 1. Strip cable by inserting into the stripping tool. Rotate the cable in a smooth and even motion to create a clean cut and pull away towards the end of the wire to remove the sheathing.

Step 2. Untwist wire ends. Separate the twisted wires and straighten them out to easily sort in the right order.

Step 3. Arrange wires. Put the wires in the correct order so they can be properly crimped.

Step 4. Trim wires to size. Use the cutting section of the crimping tool to cut them into an even line.

Step 5. Attach connector. Insert the connector so that each of the small wires fits into the small grooves in the connector.

Step 6. Crimp. Insert the connector in the crimping tool. Squeeze the handles to crimp the connector and secure the wires.

Step 7. Check. Take the connector our of the tool and look at the pins to see that they're all pushed down.

Step 8. Test. Lightly tug at the connector to make sure it's attached to the cable.