Question

(a) Show how two 2-to-1 multiplexers (with no added gates) could be connected to form a 3-to-1 MUX. Input selection should be as follows: If AB = 00, select I0 If AB = 01, select I1 If AB = 1− (B is a don’t-care), select I2 (b) Show how two 4-to-1 and one 2-to-1 multiplexers could be connected to form an 8-to-1 MUX with three control inputs. (c) Show how four 2-to-1 and one 4-to-1 multiplexers could be connected to form an 8-to-1 MUX with three control inputs

Answer 1

Answer:

Explanation:

a) Show how two 2-to-1 multiplexers (with no added gates) could be connected to form a 3-to-1 MUX. Input selection should be as follows: If AB = 00, select I0 If AB = 01, select I1 If AB = 1− (B is a don’t-care), select I2

We are to show how Two-2-to -1 multiplexers could be connected to form 3-to-1 MUX

If AB = 00 select $I_o$

If AB = 01 select $I_1$

If AB = 1_(B is don't care), select $I_2$

However, the truth table is attached and shown in the first file below.

Also, the free- body diagram for 2- to - 1 MUX is shown in the second diagram attached below.

b) We are show how  two 4-to-1 and one 2-to-1 multiplexers could be connected to form an 8-to-1 MUX with three control inputs.

The perfect illustration showing how they are connected in displayed in the third free-body diagram attached below.

Where ; $I_o , I_1, I_2, I_3, I_4, I_5, I_6, I_7$ are the inputs of the multiplexer and Z is the output.

c)  Show how four 2-to-1 and one 4-to-1 multiplexers could be connected to form an 8-to-1 MUX with three control inputs.

For  four 2-to-1 and one 4-to-1 multiplexers could be connected to form an 8-to-1 MUX with three control inputs, we have a perfect illustration of the diagram in the last( which is the fourth) diagram attached below.

Where ; $I_o , I_1, I_2, I_3, I_4, I_5, I_6, I_7$ are the inputs of the multiplexer and Z is the output

Answer 2

This question is a multiplexer which is a topic in digital circuit.

Multiplexer is a type of combination circuit that consist of a maximum of $2^n$ data inputs 'n' selection lines and single output line. One of these data inputs will be connected to the output based on the values of selection lines. Another name for multiplexers is MUX.

If we have 'n' selection lines, we will get $2^n$ possible combinations zero and ones. Each combination will select a maximum of only one data input.

a)

Two 2-to-1 multiplexers to form a 3-to-1 MUX.

If AB = 00, select $I_o$

If AB = 01, select $I_1$

If AB = 1- (B is don't care) select I

The truth table for the above scenario is in the attached document below.

Figure 1 and 2 represents the solution to this question.

b).

Two 4-to-1 multiplexers and one 2-to-1 multiplexers and one 2-to-1 multiplexers are used to form an 8-to-1 MUX.

In the attached diagram, figure 3 shows a comprehensive detail of how it is structured.

Where $I_o$ to $I_7$ are the inputs of the multiplexer and Z is the output.

c) Four 2-to-1 multiplexers and one 4-to -1 multiplexer are used to form 8-to-1 MUX.

In the attached diagram, figure 4 shows how it is structured.

We would see that $I_o$ to $I_7$ are the inputs of the multiplexer and Z is the output in the system.

Learn more about multiplexers here;

https://brainly.com/question/25953942