Respuesta :
Given the front and right views, create an AutoCAD isometric of the object. Save the drawing as lab5c.dwg. Grid size is 10mm. You may approximate the location of the hidden line as long as it is consistent with the other view is given below
Explanation:
1.Use CTRL-C to copy the lines to the Windows clipboard. Go to the 2D drawing and give the PASTESPEC (Paste Special) command. This will paste an image of the selected geometry into the other drawing. SInce it is an image and not AutoCAD entities the image quality will be limited.
2.Isometric drawing in AutoCAD 2014 and older versions:
At first, you need to change your snap settings to isometric. Type DS on the command line and press enter. Drafting settings window will pop up from this window select snap and grid tab and make sure Isometric snap radio button is checked.
3.To Display a Preset 3D View
Click View tab Views panel View Manager. Find. The View tab is not displayed by default, so an alternative method is to enter VIEW at the Command prompt. You can also employ the ViewCube in the top-right corner of the drawing area.
Select a preset view (Top, Bottom, Left, and so on).
4.If you aren't in model space, double-click inside the viewport to enter model space.
Go to Home tab > Modify panel (expanded)> Change Space to start the CHSPACE command.
At the prompt, select one or more objects to move.
Press Enter to end selection and the command. AutoCAD moves the selected objects to the other space.
5.
