A steel hanger is bolted to a steel frame using two 5/8 in-18 UNF grade 7 bolts. The thickness of the hanger at the bolt is identical to that of the frame, 1 inch each. A vertical load varying between 0 and 40,000 lb is applied at the hanger. The bolts are initially tightened to 75% of its full proof load. The length of the bolt is two threads beyond the nut. Determine the factors'of safety against yielding. overloading and joint separation, respectively. And, estimate the torque necessary to develop the preload.
The answer and procedures of the exercise are attached in the following archives.
Step-by-step explanation:
You will find the procedures, formulas or necessary explanations in the archive attached below. If you have any question ask and I will aclare your doubts kindly.
